TABLE OF CONTENTS

School Settings

The main GEGI settings are located on the School Settings page (Admin menu tab → School Settings menu item). The settings are split into several groups according to their function. Part of these settings will be covered further in this guide.

Note: Further in this guide, all interface element names and menu item names will be displayed in bold type. E.g. See the School Settings page (Admin menu tab → School Settings menu item).

Additional Campuses

If all staff and students attend one campus and there are no other campuses in school, you should choose No, only 1 Main Campus from the drop-down menu for the Has Additional Campuses? setting.

If you have more than one campus, you should choose Yes and configure your campuses as described further in the Campuses section.

Note: Some GEGI interface elements are marked with icon. Hover your mouse cursor over this icon to see additional information for the element.

Address and Phone

It is recommended to fill in the Address and Phone fields. This information will be used further for GEGI-generated documents such as the Enrollment Agreement PDF.

Note: These settings will be available in campus settings if there are more than 1 campus in the school.

Campuses

Most GEGI activity is done within a campus. Your current campus is displayed in the upper right corner in the main menu. If you have access to more than one campus, you may switch to the All My Campuses mode. In this mode, you will see information for all campuses available to you.

The campus list is located at the Admin menu tab → Campuses menu item. This page displays one preconfigured campus named according to the information given during the registration at http://www.gegi.co. You can add, edit, and remove campuses.